停電電纜識別器
在進行電氣維護作業時,Ariadna CI-DE可從多條導體中輕鬆識別已停電電纜。適用場所包括電纜溝、人孔、配電盤、架空線與地下電纜的轉換處等。
Ariadna CI-DE儀器可以可靠、簡易並安全地偵測已停電電纜。
在進行電氣維護作業時,Ariadna CI-DE可從多條導體中輕鬆識別已停電電纜。適用場所包括電纜溝、人孔、配電盤、架空線與地下電纜的轉換處等。
主要特點
- 識別任何已停電的電纜
- 適用於單相及多相電纜
- 訊號注入方式:
- 直接連接
- 使用感應式夾鉗進行感應注入
- 最大電纜長度:50 km (*)
- 發射器運作時間超過 24 小時 (level 2)
- 使用前無須校準(出廠時已完成校準)。
- 偵測聲音警報
(*) 採直接連接方式時,以截面積為 50 mm² 的電纜測定。
使用Ariadna CI-DE進行已停電電纜識別
操作示意圖
直接連接

感應式夾鉗連接

*規格如有變更,恕不另行通知。
Ariadna CI-DE TX
|
尺寸 (mm) |
315 × 255 × 150 |
|
重量 |
2.6 kg |
|
防護等級 |
IP65 |
|
電擊防護等級 |
Class II |
|
訊號類型 |
電流頻率 |
|
主動訊號功率 |
10W |
|
電源輸入 |
90-264 VAC ~50/60Hz 0.55A |
|
電源輸出 |
12V DC 2A |
|
電源線末端保險絲 |
6.3 × 32 mm, 16 A0, 500 V, 50 kA, F 型(快速熔斷) |
|
顯示器 |
160×100單色螢幕 |
|
操作溫度 |
-10 / 55 ºC |
|
充電溫度 |
0 / 55 ºC |
|
運作時間 (level 2) |
超過 24 小時 |
|
可充電電池 |
8.4 V, 6.6 Ah 鋰離子電池 |
|
車用充電器 |
有 |
Ariadna CI-DE RX
|
尺寸 (mm) |
120 × 220 × 65 |
|
重量 |
0.4 kg |
|
防護等級 |
IP 54 |
|
主動訊號分析(來自 Ariadna-TX) |
振幅與極性 |
|
最大電纜長度 |
> 50 km (50 mm² 電纜,實驗室條件下) |
|
最大迴路電阻 |
2.000 Ω(直接) 10 Ω(電感) |
|
顯示器 |
240 × 400 彩色 TFT 螢幕 |
|
電池 |
4 × 1.5V 3號電池 |
|
操作溫度 |
-10 / 55 ºC |
|
內建揚聲器 |
有(用於聲音警示) |
符合標準
Ariadna CI-DE 偵測已停電電纜,並符合以下安全與電磁相容性標準:
電磁相容性:EN 61326-1
電氣安全:EN 61010-1;電擊防護 Class II

The cable identifier Ariadna CI-DE device allows to identify any type of de-energised cable, in a RELIABLE, SIMPLE and SAFE way.
Specially designed for maintenance tasks involving the handling of electrical cables, it is an effective tool that allows operators to easily and without error identify de-energised cables from other conductors in trenches, manholes, panels…
Main features
- Identify any De-energized cable
- Single-phase and multi-phase cables
- Signal injection:
- Direct connection
- Induced with induction clamp
- Max. cable length 50 km (*)
- TX operation time > 24h at level 2
- It doesn’t require calibration before using it (calibrated at factory)
- Identification sound alert
(*) Direct connection, value determined on cable of 50 mm2
View a video: Ariadna CI-DE lab
Ariadna CI-DE, de-energized cable identification
Working diagram
Direct connection

Induction clamp connection

*Specifications subject to change without notice
Ariadna CI-DE TX
|
Size (mm) |
315 × 255 × 150 |
|
Weight |
2.6 kg |
|
Protection degree |
IP65 |
|
Protection against electric shock |
Class II |
|
Signal type |
Current frequency |
|
Active signal power |
10W |
|
Power source input |
90-264 VAC ~50/60Hz 0.55A |
|
Power source output |
12V DC, 2A |
|
Fuse at the end of mains leads |
6.3×32 mm, 16A0, 500V, 50KA, type F (quick acting) |
|
Display |
Monochrome 160×100 |
|
Operating Temperature |
-10 / 55 ºC |
|
Charging temperature |
0 / 55 ºC |
|
Operation time (level 2) |
> 24h |
|
Rechargeable battery |
8.4V 6.6Ah Li-ion |
|
Car charger |
Yes |
Ariadna CI-DE RX
|
Size (mm) |
120 × 220 × 65 |
|
Weight |
0.4 kg |
|
Protection degree |
IP54 |
|
Active signal analysis (From Ariadna -TX) |
Amplitude and polarity |
|
Max. cable length |
> 50 km (50mm2 cable in laboratory conditions) |
|
Max. Loop resistance |
2.000 Ω (Direct) 10 Ω (Induced) |
|
Display |
240×400 Colour TFT |
|
Battery |
4 × 1.5V AA |
|
Operating Temperature |
-10 / 55 ºC |
|
Internal speaker |
Yes (for sound alert) |
Compliance standards
Ariadna CI-DE detects any de-energized cable, and complies with the following safety standards:
Electromagnetic compatibility: EN 61000-6-3, EN 61000-6-2
Electrical safety: EN61010-1 CAT IV 300V, Protection against electric shock, Class II
